Configuration Requirements
Configuration package E-Flux by Road
Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Online Installation Manual GL Charge LiteBox
Configuration device: mobile phone
CP Tool app
Follow the steps
Step 1: Download the CP Tool app from the Google Play Store or the App Store.
Step 2: Open the CP Tool app on your phone and enable Bluetooth to be able to find the serial number of the charger in the application.
Step 3: Select your device and enter the password 12345678 to get access to the configuration. You can change the password later if you want to.
Step 4: Go to the configuration of the charger and configure the network settings, you can select the following network options: Wifi, 4G & LAN.
Note: if you’re using a sim card from E-Flux, please enter the following APN name: m2m.services
Step 5: Enter the following OCPP settings to set up the connection with E-Flux by Road:
Server URL: ws://ocpp.road.io/e-flux
CP Name: ‘Enter the serial number of the charger’
Authorization Key: ‘Leave empty'
Charge Mode: APP
Step 6: Click on Set to save the settings and reboot the charger to connect to the backend.
If you are the installer of the charging station, go to Step 7. If you are the owner of the charging station, go to step 8.
Step 7: Complete the following steps to activate the station on the E-Flux by Road platform:
Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 8: Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 7 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!