Skip to main content
All CollectionsManuals
Manual: Daze Home/Urban/Share/Duo
Manual: Daze Home/Urban/Share/Duo

On this page you will find the steps to connect the Daze charger to the E-Flux by Road platform.

Jochem Boot avatar
Written by Jochem Boot
Updated over 3 weeks ago

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • DAZE configuration app

  • Configuration device: mobile phone

Follow the steps

For the OCPP configuration, it is necessary to first create a network
and add the chargers to the said network. The entire procedure requires the phone's Bluetooth to be active in order to ensure connection to the wallbox.

Step 1: Via the app you Add a Network via Add network en fill in the details of the network. Than you click on Add charger.

Step 2: Activate the OCPP via Configurations, then to OCPP Configuration. Here you can switch on the OCPP Activation.

Step 3: Then you can select E-Flux as the provider and then you fill in the URL ws://ocpp.e-flux.nl/1.6/e-flux and press on save. Then enter the Charger ID and press save to complete the procedure.

If you are the installer of the charging station, go to Step 4. If you are the owner of the charging station, go to step 5.

Step 4: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 5: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 4 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?