Skip to main content

Manual: KREISEL Electric

On this page you will find the steps to connect the KREISEL Electric charger to the E-Flux platform.

Configuration requirements

  • Configuration package E-Flux

    • Contains: SIM card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Configuration Interface KREISEL Cloud

  • Configuration device: laptop

Follow the steps

Step 1:You will receive access to the KREISEL cloud and the corresponding charging station(s) after you contact KREISEL.

Step 2: Navigate to the Basic Settings/OCPP general via settings of the charger.

Step 3: Enter the following values to setup the connection with E-Flux:

  • Backend URL:

    • When using a white Road SIM card or another connection method: ws://ocpp.road.io/e-flux

    • When using a purple Road SIM card: ws://ocpp-internal.road.io/e-flux

  • Backend Charger ID: Serial number of charger

  • OCPP Version: 1.6

  • DNS Forward: ocpp.e-flux.nl

Step 4: Navigate to OCPP SIM and enter the following values to setup the connection with E-Flux:

  • SIM APN:

    • When using a white Road SIM card or another connection method: m2m.services

    • When using a purple Road SIM card: road.io

If you are the installer of the charging station, go to step 5. If you are the owner of the charging station, go to step 6.

Step 5: Complete the following steps to activate the station on the E-Flux platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to setup new EVSE in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on setup charging station.

  4. Click on upload configuration, then click next.

  5. Choose and define the connector type, and choose save connector configuration.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 6: Complete the following steps to register the station on the E-Flux platform:

  1. Ask your installer to complete step 5 to finish the configuration of your charger, or call E-Flux to finish the configuration.

  2. Create an E-Flux account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux platform!

Did this answer your question?