On this page you will find the steps to connect the Enphase IQ EV Charger to the E-Flux by Road platform.
Configuration Requirements
Configuration package E-Flux by Road
Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Enphase app setup for using IQ EV Charger
o For IQ EV Charger only sites without Enphase Solar or Battery system:
App setup guide (standalone)
o For IQ EV Charger on sites with Enphase Solar or Battery systems:
App setup guide (integrated)
Follow the steps:
Step 1: Install and commission the IQ EV Charger using the Enphase Installer Toolkit
App. You can add the charger to an existing site or create a new site
specifically for the IQ EV Charger.
If you're the owner and wish to commission your IQ EV Charger using the
Enphase App after installation, you can follow the steps in this Commissioning
guide
Step 2: Owners can customize their IQ EV Charger for optimal use via the Enphase
App by following the setup guides below
For IQ EV Charger only sites without Enphase Solar or Battery system:
App setup guide (standalone)For IQ EV Charger on sites with Enphase Solar or Battery systems:
App setup guide (integrated)
Step 3: Once the IQ EV Charger is installed and commissioned, owners can follow the
below steps to initiate the Partner integration.
Go to Menu - Settings -; IQ EV Charger - Partner Integration
Once on partner integration page select E-Flux by Road as the partner.
Go through the details and give consent to grant access of your system to Road
Once enabled the connection request for the charger is sent to E-Flux by Road platform.
If you are the installer of the charging station, go to Step 4. If you are the owner of the charging station, go to step 5.
Step 4: Complete the following steps to activate the station on the E-Flux by Road platform:
Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 5: Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 4 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!