Skip to main content

Manual: Goneo (Eloy & Becker)

On this page you will find the steps to connect the Goneo charger to the E-Flux by Road platform.

Jochem Boot avatar
Written by Jochem Boot
Updated this week

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Mobile phone

Follow the steps

Step 1: Connect the GONEO smart cable into the domestic power outlet.

Step 2: Press and hold immediately the button for 3 seconds to activate the AccessPoint mode.

Step 3: Scan the first QR code on the screen of the GONEO smart cable. The Wi-Fi parameters of your smartphone/tablet will appear, attempting to connect to the local Access Point [AP] of your GONEO smart cable. After the connection is established, the first QR code disappears, and the second QR code appears.
​

Step 4: Scan the second QR code. Once you’ve scanned this QR code, it will open your web browser and display the web app.

Step 5: Once you are connected to the web application, please select Service in the menu. Click on the three horizontal stripes to access the menu.

Step 6: Via the Service page, you can now configure the OCPP parameters:

  1. Check if OCPP is activated. If not, please toggle it on.

  2. Enter the server URL of the Charge Point Management System (CPMS)

    • When using a white Road SIM card or another connection method: ws://ocpp.road.io/e-flux

    • When using a purple Road SIM card: ws://ocpp-internal.road.io/e-flux

  3. Enter the identifier of your device, use the unique serial number of your GONEO or an EVSE-ID (NL*EFL*EV*XXXXXXX).

  4. Enter the Tag ID, this is the UID code of the charging card that will be used to reimburse charging costs. You can contact Road to request the UID / RFID code of the charge card. The UID code should look like this: 04FF3XXXXX6580.

  5. The Password is not required.

Step 7: Select Network in the menu. Via the Network page, you can now configure the SIM parameters:

  1. Select SIM as the SIM type.

  2. Enter m2m.services as the APN.

  3. Leave the other settings empty.

If you are the installer of the charging station, go to Step 8. If you are the owner of the charging station, go to step 9.

Step 8: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 9: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 8 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?