Configuration Requirements
Configuration package E-Flux by Road
Contains: EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
User Manual Sungrow AC22E-01
iEnergyCharge App
Configuration device: mobile phone
UTP cable
Follow the steps
Step 1: Scan the QR code below, and download the iEnergyCharge App by following the onscreen instructions.
Step 2: Open the app and tap Add device on the Home screen.
Step 3: Scan the QR code on the side of the charger and tap Establish Connection.
Step 4: Go to WLAN settings on your mobile device, and connect to the charger's WLAN.
Step 5: Once connected successfully, go back to the App and enter the username and password:
Username: admin
Password: pw8888
Step 6: Select OCPP as the charging mode and enter the following server address:
When using a white Road SIM card or another connection method: ws://ocpp.road.io/e-flux
When using a purple Road SIM card: ws://ocpp-internal.road.io/e-flux
Step 7: Connect the charger to a stable WLAN network.
Step 8: After network connection is established successfully, tap add device and tap complete to finalize the commissioning process.
If you are the installer of the charging station, go to Step 9. If you are the owner of the charging station, go to step 10.
Step 9: Complete the following steps to activate the station on the E-Flux by Road platform:
Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 10: Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 9 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!