Configuration Requirements
Configuration package E-Flux by Road
Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
FusionCharge DC Charging System App Commissioning Guide (Europe)
Antohill App
Configuration device: mobile phone
Follow the steps
Step 1: Download the Antohill app on your mobile phone and complete the Local Device Commissioning process according to the FusionCharge DC Charging System App Commissioning Guide (Europe).
Step 2: Once the local commissioning is done, navigate to Maintenance → Business Platform in the Antohill app and set the Connected Device Type to SPC_M.
Step 3: Set the Business Platform Protocol Type to OCPP and configure the Preferred Networking Mode to 4G (wireless connection) or FE (network cable).
Note: You are advised to set the two networking modes to different values. If the first networking mode is unavailable, the system will automatically switch to the second networking method.
Step 4: If you’re using an E-Flux by Road SIM card, you must configure the APN settings by selecting Home → Power Unit → Wireless Comm. Select Configuration and enter the APN name accordingly:
When using a white Road SIM card or another connection method:
m2m.servicesWhen using a purple Road SIM card:
road.io
Step 5: Navigate back to Maintenance → Business Platform and select Comm. Parameters. Configure the following parameters in this menu:
Access Operation Platform Mode: Domain Name
Domain Name: ws://ocpp.road.io/e-flux
Access Path: /1.6/e-flux
Business Platform Port: 80
WebSocket: WS
Username and Password: leave empty
If you are the installer of the charging station, go to Step 6. If you are the owner of the charging station, go to step 7.
Step 6: Complete the following steps to activate the station on the E-Flux by Road platform:
Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 7: Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 6 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!