Skip to main content

Manual: Mennekes 4You & 4Business

On this page you will find the steps to connect the Mennekes 4You & 4Business charger to the E-Flux by Road platform.

Jochem Boot avatar
Written by Jochem Boot
Updated yesterday

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Installation Manual AMTRON 4You/Business

  • AMTRON® 4Installers App

  • Configuration device: laptop/mobile phone

Follow the steps

Step 1: Download the AMTRON® 4Installers App on your laptop or mobile phone.

Step 2: On the homepage, click on search for charging systems in the network to add the charger to the app.

image-20251124-111155.png

Step 3: Go to the Saved Charging Systems menu and log in the Webinterface of the charger.

image-20251124-112002.png

Step 4: Use the password of the charger to log in.

image-20251124-112309.png

Step 5: Navigate to Settings → Network → Backend and enable the backend connection.

image-20251124-112703.png

Step 6: Select the preferred connection method, make sure that the serial number is filled as the OCPP ID, and enter the following server URL:

  • When using a white Road SIM card or another connection method: ws://ocpp.road.io/e-flux

  • When using a purple Road SIM card: ws://ocpp-internal.road.io/e-flux

image-20251124-121210.png

Step 7: If an E-Flux by Road SIM card is used for the connection method, the APN must be configured via Settings → Network → Mobile Communication. Here you can enter the following APN to activate the connection:

  • When using a white Road SIM card or another connection method: m2m.services

  • When using a purple Road SIM card: road.io

image-20251124-123130.png

Step 8: Click on Save and Reboot.

If you are the installer of the charging station, go to Step 9. If you are the owner of the charging station, go to step 10.

Step 9: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 10: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 9 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?