Skip to main content

Manual: SolaX Power Smart EV Charger G2

On this page you will find the steps to connect the SolaX Power Smart EV Charger G2 charger to the E-Flux by Road platform.

Jochem Boot avatar
Written by Jochem Boot
Updated over a week ago

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Smart EV Charger G2 User Manual

  • SolaXCloud app

  • Configuration device: mobile phone

Follow the steps

Step 1: Download the SolaXCloud app from the App Store or Google Play Store.

Step 2: Open the app and follow the instructions to complete the sign up process.

Step 3: Go to the Home page or Device page and click on the plus symbol to add the device.

Step 4: Select the device, press Reconfigure, and configure the Wi-Fi settings accordingly.

Step 5: Navigate to the Remote setting menu and select Advanced setting.

Step 6: Click on Application scene in the Advanced setting menu.

Step 7: Change the Application scene to OCPP.

Step 8: Once the OCPP scene is selected, configure the following settings in the Charger setting menu:

  • OCPP Server:

    • When using a white Road SIM card or another connection method: ws://ocpp.road.io/e-flux

    • When using a purple Road SIM card: ws://ocpp-internal.road.io/e-flux

  • Charger ID: enter the serial number of the charger

Step 9: Click on Save and reboot the charger.

If you are the installer of the charging station, go to Step 10. If you are the owner of the charging station, go to step 11.

Step 10: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 11: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 10 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?