Skip to main content

Manual: Hellonext H2 40-80

On this page you will find the steps to connect the Hellonext H2 40-80 charger to the E-Flux by Road platform.

Written by Jochem Boot
Updated today

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Configuration guide Hellonext

  • EVbee Service App

  • Configuration device: mobile phone

Follow the steps

Step 1: Download the EVbee Service App from the App store or Play Store and register your account.

Step 2: Open the app, select Create New Site, choose Commercial as the site type and fill in the site info.

Step 3: Enter the Main Fuse Data and the Circuit Data of the site.

Step 4: Add the charging station to the site by using one of the following methods:

  • Scan the QR code that’s located on the label of the charger.

  • Use the Bluetooth scanner in the app to find the charger.

  • Enter the Serial Number of the charger to add it to the site.

Step 5: Set up the Basic Settings by configuring the Max. charge power and the Time zone accordingly.

Step 6: Continue to the Network and backend settings, change the Mode to online and configure the following settings:

  • OCPP Backend:

    • When using a white Road SIM card or another connection method: ws://ocpp.road.io/e-flux

    • When using a purple Road SIM card: ws://ocpp-internal.road.io/e-flux

  • Charger ID: enter the serial number of the charger

Step 7: Select the preferred Communication Mode and configure the following APN if a Road SIM card is used:

  • When using a white Road SIM card or another connection method: m2m.services

  • When using a purple Road SIM card: road.io

Step 8: Press Done to complete the configuration process.

If you are the installer of the charging station, go to Step 9. If you are the owner of the charging station, go to step 10.

Step 9: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 10: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 9 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?