Skip to main content

Manual: Dahua Technology

On this page you will find the steps to connect the Dahua D-Volt Ultra charger to the E-Flux by Road platform.

Written by Jochem Boot

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Configuration guide D-Volt Ultra

Follow the steps

Step 1: Press and hold the upper center of the touchscreen for 1.5 seconds. The touchscreen will automatically open the administrator password input page.

Step 2: Tap the dialog box to enter the password, and then tap the upper-right corner of the page.

Step 3: Select the Network Connection and configure the network parameters accordingly.

Note:
When using a purple Road SIM card the APN name should be changed to: road.io. When using the white Road SIM card or another SIM card the APN name should be m2m.services

Step 4: Select the Platform Settings and configure the following server URL:

  • When using a white Road SIM card or another connection method: ws://ocpp.road.io/e-flux

  • When using a purple Road SIM card: ws://ocpp-internal.road.io/e-flux

If you are the installer of the charging station, go to Step 5. If you are the owner of the charging station, go to step 6.

Step 5: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 6: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 5 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?