Configuration Requirements
Configuration package E-Flux by Road
Contains: SIM card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Installation Instructions WallGreenBox
Tuya Smart app
Configuration device: mobile phone
Follow the steps
Step 1: Download the Tuya Smart app, create an account and add your device to the application via bluetooth, Wi-Fi or geolocation.
Step 2: After completing the steps to add the device to the app, you can navigate to the Settings menu of the charger to configure the OCPP settings. Enter the following credentials:
Charge Point ID: ‘enter the ChargeBoxSerialNumber’
Server URL:
When using a white Road SIM card or another connection method: ws://ocpp.road.io/e-flux/
When using a purple Road SIM card: ws://ocpp-internal.road.io/e-flux/
Step 3: Configure the Wi-Fi settings or the 4GAPN settings if a SIM card is used to setup the network connection. Enter the following APN name if an E-Flux by Road SIM card is used for the network connection:
When using a white Road SIM card or another connection method:
m2m.servicesWhen using a purple Road SIM card:
road.io
Note: Press and hold the Settings button to access the APN settings.
Step 4: In the same menu, check if 'Whether the OCPP platform is continuously held' is enabled and reboot the charger to make sure the settings are applied.
If you are the installer of the charging station, go to Step 5. If you are the owner of the charging station, go to step 6.
Step 5: Complete the following steps to activate the station on the E-Flux by Road platform:
Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 6: Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 5 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!