How do I connect a charging station to a user?

So you know who belongs where

Gina ter Heide avatar
Written by Gina ter Heide
Updated over a week ago

A charging station connects to the platform via an Internet connection and a specific URL. If a charging station is installed and powered, you can find it under 'Charging Stations' in the menu.

The status is displayed as follows:

  • Setup progress = the charging station is tracked in the platform but still needs to be configured via Autowizard.

  • Activation pending = Autowizard is completed and the charging station can be activated by the customer.

  • Setup completed = charging station has been registered by the customer.

After the account, the user and the location have been developed, you can also manually set up a charging station with this data. Click on the pen icon for editing and then select:

  • Billing plan (subscription)

  • Account

  • Field Service Account

  • Place

  1. Select the correct roaming settings. Choose between "Allow charging from other networks" so that other charge cards can charge and automatic settlement takes place or go for "Have every card charged here for free" so that every RFID card can start a charging session for free and therefore no settlement will take place;

  2. Enter the rates (this is excl. VAT);

  3. Assign an access group;

  4. Leave the OCPP Authorization Method set to "None".

Did this answer your question?