Configuration Requirements
Configuration package E-Flux by Road
Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Laptop, tablet or smartphone with internet connection
Follow the steps:
Step 1: Insert the SIM card into the charger. To do this, follow Webasto's manual. You can download the Webasto Installation Instructions on this webpage.
Step 2: Make sure the that Webasto Live is connected to electricity and grab your laptop. Stay close to the Webasto to establish a good connection to the charging station.
Step 3: Find within the available Wi-Fi networks the hotspot that matches the serial number of the charging station (Webasto!Live #SERIALNUMBER). To do this, we recommend using a Windows laptop.
Step 4: Connect to the hotspot and enter the Wi-Fi Key (WPA 2) to connect to the hotspot. The login details for the charger can be found on the sticker of the Webasto. See the picture below.
Step 5: Open your browser and type 172.20.0.1 in the search bar and press enter.
Step 6: Go to the Webasto dashboard and enter your password. The password is the login password shown on the sticker.
Step 7: In the dashboard, click on Network and fill in the following values:
Access point Name (APN): m2m.services
APN Username: Leave empty
APN Password: Leave empty
Simcard PIN Number: Leave empty
Network selection mode: Auto Requested
Network operator: Leave empty
Network operator name format: Alphanumeric Short
Click on Save.
Step 8: Go to Backend and fill in the following values:
Connection Type: GSM
ChargeBoxID: EVSE ID --> see the sticker included in the "Ready to charge" envelope. This number must be copied exactly as it appears on the sticker, but with dashes as in this example: (NL*EFL*EV*XXXXXXX)
OCPP Mode: OCPP - J 1.6 *
Websockets JSON OCPP URL of backend: ws://ocpp.e-flux.nl/1.6/e-flux
Websocket keep-alive interval: 60
Restart transaction after power loss: On
Backend connection timeout: 60
SSL Strictness as Client: Normal SSL Auth
Step 9: Once your Wallbox appears on the screen, you may click on the charger and wait for it to connect.
Step 10: Once connected, press the cogwheel, select connectivity, select WIFI and connect the charger to a network.
Step 11: Save the settings and reboot the charger. After the restart, you will lose the connection to the hotspot as the charging station restarts.
If you are the installer of the charging station, go to step 12. If you are the owner of the charging station, go to step 13.
Step 12: Complete the following steps to activate the station on the E-Flux by Road platform:
Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 13: Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 12 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!