Skip to main content
All CollectionsManuals
Manual: Wallbox
Manual: Wallbox

On this page you will find the steps to connect the Wallbox charger to the E-Flux by Road platform.

Sjoerd avatar
Written by Sjoerd
Updated over 4 months ago

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Online guide Wallbox

  • Wallbox packaging box

  • Wallbox App. Download the app for IOS or ANDROID

  • Configuration device: mobile phone with internet connection

Follow the steps:

Step 1: Download the 'Wallbox' app from the appstore or google playstore. Open the app, switch on your bluetooth and create an account.

Step 2: Verify your account using the email received from Wallbox and log in.

Note: The e-mail may end up in your spam.

Step 3: Once you see the screen shown in the picture below, the pairing process begins. Press “I already have a charger”.

Step 4: Pair the charger with the app using the QR code which can be found on the charging station, or pair the charger by using ‘manually add'. If you’ve chosen to scan the QR code, the serial number will automatically appear on the screen. If you’ve chosen to manually add the serial number, you will have to fill in the number that’s shown underneath the QR code.

Step 5: Enter the serial number and the UID code. The UID can be found on the box of the Wallbox.

Step 6: In the next step, your Wallbox will appear on the screen -> choose the Wallbox -> wait for it to connect -> once it´s connected, press the cogwheel -> select connectivity -> select WIFI and connect the charger to a network -> press on save.

Step 7: Go to OCPP -> Go to URL lists -> Select E-Flux -> Fill in an OCPP ID (Serial number) -> No password -> Save.

If you are the installer of the charging station, go to step 8. If you are the owner of the charging station, go to step 9.

Step 8: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 9: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 8 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

Do you have the Wallbox Pulsar Plus? After you’ve registered the charging station with E-Flux, you can apply for Plug & Charge in our form.

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?