Configuration Requirements
Configuration package E-Flux by Road
Contains: EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Follow the steps:
Step 1: To connect your Tritium charge point to the E-Flux by Road backend, you need to send an email to the Tritium support and ask them to configure your charge point(s) to the following OCPP URL: ws://ocpp.road.io/e-flux
Once you’ve received an answer from Tritium that your charge point has been connected to E-Flux by Road, you can proceed with the installation process.
If you are the installer of the charging station, go to step 2. If you are the owner of the charging station, go to Step 3.
Step 2 : Complete the following steps to activate the station on the E-Flux by Road platform:
Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 3 : Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 2 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!