All Collections
Manuals
Manual: Smappee
Manual: Smappee

On this page you will find the steps to connect the Smappee charger to the E-Flux by Road platform.

S
Written by Sjoerd Kortekaas
Updated yesterday

On this page you will find the steps to connect the Smappee charger to the E-Flux by Road platform.

Configuration Requirements

  • Configuration package E-Flux by Road.

    • Contains: EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station.

  • Online manual Smappee EV Base/Wall.

  • Configuration device: laptop/mobile phone.

  • Smappee Energy Monitor app.

Follow the steps

Step 1: Log in with the partner account you’ve received from Smappee via https:/dashboard.smappee.net/login. You can create an account via the ‘Smappee Energy Monitor' app if you haven’t received the partner account from Smappee. You can download this app for IOS and ANDROID.

Step 2: Once you’ve created the partner account, you can log into the dashboard on your laptop: https:/dashboard.smappee.net/login (not possible on mobile phone).

Step 3: Click on '+' 'Add board' on the left side.

Step 4: Fill in the settings of the new board as shown in this picture:

Step 5: You will now enter the management screen of your linked charging station.

Step 6: Select the charge point and scroll down until you see the same screen as this:

Step 7: Click on the pen to the right of: session activation method.


Step 8: Then enter Swipe and charge -> Public charging -> Other CSMS, and add this link: ws://ocpp.e-flux.nl/1.6/e-flux. You can also turn on multiple settings here.

If you are the installer of the charging station, go to step 9. If you are the owner of the charging station, go to step 10.

Step 9: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 10: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 9 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?