Smappee

In this guide, we will show you how to install a Smappee charging station easily and quickly. See everything you need below.

S
Written by Sjoerd Kortekaas
Updated this week

Guide Smappee

Content configuration package

  • EVSE ID

  • Online manual Smappee EV Base/Wall

  • Envelope with the QR code for the end customer

Installer requirements

  • Laptop with internet connection

  • Online manual charge point Mennekes

  • Mobile phone with the Smappee Energy Monitor app.

Download the app for IOS or for ANDROID

Follow the steps

Stap 1: Log in with partner account received from Smappee at https:/dashboard.smappee.net/login Not received a partner account? Then create an account via the 'Smappee Energy Monitor' app.

You can download it for IOS and ANDROID

Stap 2: Account created? Then log in via your laptop: https:/dashboard.smappee.net/login (Not via the mobile).

Stap 3: Click on '+' Add board' on the left side

Stap 4: Fill in the settings of the new board as shown in Figure 1

Step 5: You will now enter the management screen of your linked charging station.

Step 6: Select the charge point and scroll down until you see the same screen as image 2

Step 7: Click on the pen to the right of: 'session activation method'.

Stap 8: Then enter 'Swipe and load' - 'Load public' - 'Other CSMS' and add this link ws://ocpp.e-flux.nl/1.6/e-flux in (Look at picture 3 here). You can also turn on multiple settings here.

Stap 9: Contact Road (+31 (0)20 76306 20) to ask whether the charging station has connected to our platform. Please provide the EVSE ID or the serial number for this purpose.

Stap 10: E-Flux approves the charger. Register the charging station by scanning the QR code on the envelope ''Ready to charge?" or by going to www.e-flux.nl/instructies-account/.

Image 1

Image 2

Image 3

The charging station is now linked to the Road platform!

Did this answer your question?