All Collections
Manuals
Schneider EV Link Pro
Schneider EV Link Pro

In this guide, we will show you how to install a Schneider EVlink Pro AC charging station easily and quickly. See everything you need below.

S
Written by Sjoerd Kortekaas
Updated this week

Guide Schneider EVlink Pro AC

Steps

Steps 1 eSetup app:

Download the eSetup App from AppStore and open it.

Follow the instructions and accept the User agreement.

Log in to save your settings.

Allow access to local devices in the network and to Bluetooth, to be able to use all functions in the app.

2. Connection

Choose the EVlink Pro AC in the main menu to start searching for the charger.

You will see all of the chargers in the approximate vicinity with an active Bluetooth.

Tip: The Bluetooth connection is only active for 2 hours after being turned on. After that it can be reactivated with an admin card.

Click on your charging station and confirm the connection.

Enter a 6-digit code to set the pin-code for your charger.

Tip: 123456 isn’t an option.

After that you will be able to connect to your charging station with the pin-code you’ve just set.

As soon as the connection was established successfully you will have all of the charger’s features at your disposal.

Tip: The first card you use will automatically become the admin card and will be able to turn Bluetooth on and introduce other charge cards to the charger.

3. Connecting to backend

There is a menu with all charger settings in “Configuration”.

Click on “Configuration”.

Then click on “Backend-Connection”.

To connect the charger to the backend it must be connected to the Internet via a modem or network.

  • In the backend URL enter - ws://ocpp.e-flux.nl/1.6/e-flux

  • The charger ID is unique and should look like this - [EVlink Pro AC] - [20105]. Instead of [20105] please enter the ID of your charger.

  • Click on “ON” on top in the Backend connection field.

  • Choose “All cards will be accepted” in the “Offline mode” part.

The charging station is now linked to the Road platform!

Did this answer your question?