On this page you will find the steps to connect the NRG-Kick charger to the E-Flux by Road platform.
Configuration package E-Flux by Road
Contains: EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
NRG Kick app
Follow the steps
Step 1: Create an account in the NRG Kick app.
Step 2: After creating the NRG Kick Cloud account you enter the Charging network settings.
Step 3: Select Custom.
Step 4: Fill in the E-Flux by Road connection URL: ws://ocpp.e-flux.nl/1.6/e-flux
Step 5: Enter the unique serial number of your NRGkick or an EVSE-ID (NL*EFL*EV*XXXXXXX) as the Chargepoint Identifier.
Step 6: Fill in the User Tag Identifier. This is the UID code of the charging card that will be used to reimburse charging costs.
Note: You can contact your charge card provider to request the UID / RFID code of the chargecard. The UID code should look like this: 04FF3XXXXX6580.
Step 7: Setup only has to be done one time
Step 8: Save the settings
If you are the installer of the charging station, go to step 9. If you are the owner of the charging station, go to step 10.
Step 9: Complete the following steps to activate the station on the E-Flux by Road platform:
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 10: Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 9 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!