Guide Mennekes
Content configuration package
Simcard
EVSE ID
Online guide Mennekes
Envelope with the QR code for the end customer
Installer supplies
Cable (Included with charging station)
Laptop with USB connection
The envelope with the QR code for end customers
Online manual charging point Mennekes
Follow the steps
Step 1: Connect the laptop to the charger via the cable provided
Step 2: Enter the following IP address in the URL bar: http://192.168.123.123/
Step 3: A window will appear where you can log in. Login with the username operator. The password can be found on your own supplied data sheet. Note: each socket has its own password to log in to the ECU
Step 4: Click on network and enter the following details: Access Point Name (APN) = m2m.services All other data will be filled in automatically and you can leave it as is.
Step 5: Click on save
Step 6: Click on backend and enter the following data:
Connection type = GSM (if connected via SIM card) OCPP ChargeBoxIdentity = Enter the ChargePointID of your charger here. If you have received an EVSE ID (NL*EFL*EV*1234567) from us, enter this number here. OCPP Mode = OCPP-J 1.6 Websockets JSON OCPP URL of the backend = ws://ocpp.e-flux.nl/1.6/e-flux Leave the rest of the settings as they are.
Step 7: Click save and then reset the charging station
Stap 8: Call Road (+31 (0)20 76306 20) once the reset is complete to check that the connection to the eMobility platform has been made. (Please wait a few minutes before calling).
Stap 9: Register the charging station by scanning the QR code on the 'Ready to charge?' envelope. Or go to: https://www.e-flux.nl/instructies-account/
Figure 1: This is what the enclosed data sheet looks like