Follow the steps
Step 1. App installation
Android: Download the Atlas commercial charger network configuration app by scanning the QR-code on the right or clicking on the link.
iPhone: First, you will need to get the UDID of your device, send it to EVCCE and they in turn will send you the link to install the app.
Click on the link and open it with your mobile phone browser.
Click get your UDID now > get it! > allow download.
Find it in the system settings page: settings > general > profile > UDID.tech device registration > install, after installation, the browser
Step 2. Log in
Open the app and log in using these credentials:
Account: maintenance
Password: 123654
Turn Bluetooth on and click on start scanning to search for chargers.
Select your charger and click on connect. Here you will need to enter an authorisation code: 123456.
Go to settings, then click on network. After that click on server and choose custom.
Enter the server address: ws://ocpp.e-flux.nl/1.6/e-flux
Enter the server port: ws://ocpp.e-flux.nl/1.6/e-flux:port/ Reboot the charger to finalise all the changes.
Step 3. Network configuration
There are three optional network settings:
Ethernet,
Mobile (if the charger has a 4G module)
Wireless network as network connections.
Note that if you choose Wi-Fi, you must turn to WLAN settings to enter the name and password of it. Remember to check the IP address when you connect with Ethernet. You should set the IP address manually if it doesn’t match.