In this guide, we will show you how to easily and quickly install an Etrel charging station. See below for everything you need

Written by Sjoerd Kortekaas
Updated this week

Guide Etrel

Content configuration package

  • Simcard


  • Online guide ABL

  • Envelope with the QR code for the end customer

Installer requirements

  • Windows laptop with UTP connection

  • UTP cable

  • Anydesk, you will find this program here

Follow the steps

Step 1: Connect the charger to your laptop via a UTP cable, the input for this can be found on the bottom left of the charging station.

Step 2: Set your network connection to a fixed IP address, you do this through the following steps: Go to 'Network and Internet settings' Click on Ethernet Click on Adapter Options Click on Ethernet Click on Properties Click Internet Protocol version 4 (TCP /IPv4) twice Then enter the following information: IP Address: Subnet mask: Default gateway: Leave the remaining boxes blank and click Ok.

Step 3: Start your browser and enter the following address via the URL bar:

Step 4: Log in with the following details: Username: [email protected] Password: toor

Step 5: Click the three dashes at the top left, then click configuration.

Step 6: Select connectivity, then click on GSM connectivity.

Step 7: Enter the following details: APN: Username: 'leave empty Password: 'empty' Ping server: Ping interval: 60 Click on save.

Step 8: Next, under the Connectivity heading, press Central system connectivity and set the following details: Charge point identity: enter the number on the sticker provided here, this is usually the EVSE ID (NL*EFL*EV*XXXXXXXXX). Protocol Type: OCPP 1.6 JSON Central system endpoint URL: ws://

Stap 9: Then return to the dashes at the top and press diagnostics. In doing so, select restart charger.

Stap 10: After 5 minutes, contact E-Flux to verify that the charging station has connected to our platform. To do so, enter the EVSE ID provided in the envelope.

Stap 11: E-Flux approves the charger. Register the charging station by scanning the QR code on the envelope "Ready to charge?" or by going to

The charging station is now linked to the Road platform!

Did this answer your question?