All Collections
Manual: EVBOX G4
Manual: EVBOX G4

On this page you will find the steps to connect the EVBOX G4 charger to the E-Flux by Road back office platform.

Written by Sjoerd Kortekaas
Updated over a week ago

Configuration Requirements

  • Configuration package E-Flux by Road.

    • Contains: EVSE ID and configuration manual for installer and owner.

  • Installation guide EVBox.

  • EVBox Connect app.

  • Configuration device: mobile phone.

Follow the steps:

Step 1: Download the EVBox connect app.

Step 2: Once the app opens, the screen displays “hello, I'm ready to pair”. Click on the Start pairing button.

Step 3: The charge point will start searching for connection.

Step 4: As soon as the connection is established, the charge point appears on the screen and asks for a pairing code. This code can be found in the box provided with the charger.

Step 5: Once the charger is paired using the pairing code, select the installation mode option -> confirm that you want to enable this mode -> enter the pairing code again.

Step 6: Then under back office/management system, select E-Flux.

Step 7: Click save and restart the charger by cutting the power from the charger.

If you are the installer of the charging station, go to step 8. If you are the owner of the charging station, go to step 9.

Step 8: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 9: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 8 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?