Guide Easee
Configuration package content
EVSE ID
Online guide Easee
Envelope with the QR code for the end customer
Installer requirements
Laptop or phone with internet connection
Online guide Easee
Follow the steps
Step 1: Before the charging station can be linked to Road, you need to click the button above the LED strip until it turns green, the charging station now transmits a wifi signal.
Step 2: Go to the following website (if using laptop) to pair the Easee home with Road: http://easee.cloud/auth/signin or copy the url in your mobile browser.
Step 3: Create an account, activate your account via the code sent to your phone and log in.
Step 4: Here, select 'My Products' and press 'Add new product'.
Step 5: Enter the serial number and ProductPin. These can both be found on the charging station or on the back of the manual.
Step 6: Then click on view product. The charger is now linked to the account.
Step 7: Scroll down and click WiFi, select a WiFi network here and click save.
Step 8: Scroll up and click on 'My charging locations' on the left-hand side.
Step 9: Select operator and find Road, click E-Flux B.V. Then click on 'pair'.
Step 10: Successful! The charger will start connecting to Road's backend.
Step 11: Charger is connected, then click on 'my products' (left side) and select reboot charger.
Step 12: Call Road after a few minutes to check if the charging station has connected to the eMobility platform.
Step 13: Register the charging station by scanning the QR code on the "Ready to charge?" envelope. Or by going to www.e-flux.nl/instructies-account/.