Manual: Easee

On this page you will find the steps to connect the Easee charger to the E-Flux by Road platform.

Written by Sjoerd Kortekaas
Updated over a week ago

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Mobile phone with internet connection

Follow the steps:

Before you begin, if you're unfamiliar with installing an Easee charger or using the Easee app, please take a moment to watch this instructional video: Easee Charger Installation Video

Step 1: Open or download the Easee Installer app from the Google Play Store or the Apple App Store: Easee Installer App

Step 2: If you already have an Easee account, proceed to step 3. Otherwise, create an account using the Easee Installer app or visit Easee Cloud Signup. Activate your account via the code sent to your phone/email.

Step 3: Open and log in (if requested) to the Easee Installer app.

Step 4: In the app, click on Create new site and follow the steps provided.


  • When prompted to Select Operator, search and choose E-Flux by Road (This selection ensures communication with the Road's backend).

  • If your installer company is not listed, leave the field empty.

  • Don't forget to transfer ownership to grant the owner access to the site.

Step 5: Success! The charger will begin connecting to Road's backend

If you are the installer of the charging station, go to step 6. If you are the owner of the charging station, go to step 7.

Step 6: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 7: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 6 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?