Configuration Requirements
Configuration package E-Flux by Road
Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Autel Installation Manuals Dowload
Online guide MaxiCharger AC Wallbox YouTube
Autel Config APP from IOS or ANDROID (Apply from [email protected])
Follow the steps:
Step 1: Download the Autel app from the AppStore or Google Playstore. Switch on your Bluetooth and Wifi/Mobile data if it’s possible. Open the app and create an account (either with an e-mail or a phone number).
Step 2: Verify your account using the email received from Autel and log in. Please note! The email could end up in your spam.
Step 3: Pair the charger with the app using a QR code (it can be found on the Quick reference guide delivered together with the charger) or 'manually add'.
Do you choose the QR code? Then the serial number and pin will automatically appear on the screen.
Do you choose manual add? Then look up the serial number and pin, which are below or above the QR code.
Step 4:
Next connect via Bluetooth
Select and connect Wi-Fi
Once connected, click Account
Click on Charger
Navigate to OCPP Server
Find and connect E-Flux Cloud
Enter the following APN name if a sim card from Road is used: m2m.services
As the OCPP ID Fill in: AUT####
The ##### is the serial number of the charging station
If you are the installer of the charging station, go to step 5. If you are the owner of the charging station, go to step 6.
Step 5: Complete the following steps to activate the station on the E-Flux by Road platform:
Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 6: Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 5 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!