Ekoenergetyka

On this page you will find the steps to connect the Ekoenergetyka charger to the E-Flux by Road backoffice platform.

S
Written by Sjoerd Kortekaas
Updated this week

Step 1: Connect the charger to the Charger Management Console

To access CMC (Charger Management Console), the user must connect to the charging station IP address from a web browser using a standard HTTP connection.

Step 2: Fill in the correct network settings

The network settings must be set according to the manufacturer's manual:

  • IP address: 192.168.14.100

  • Subnet mask: 255.255.255.0

Step 3: Log in to the Ekoenergetyka configuration page

As an address, a user must type the IP address of the charging station - http://192.168.14.190 . After successful connection, the user has to log in using “username” and “password” provided by the manufacturer.

Step 4: Connect the charger to the backoffice URL

Edit the OCPP server URL (ws://ocpp.e-flux.nl/1.6/e-flux) in the "Settings" menu and restart the charging station. Your charging station will be connected to the E-Flux by Road platform.

Step 5: Call E-Flux to verify the connection

Are you the charge point owner? Do the following: Once the connection is complete, call E-Flux by Road (085-0185243) to verify that the connection to the E-Flux by Road platform has been made. (Wait a few minutes before calling).


Did this answer your question?