All Collections
Manuals
Manual: Ekoenergetyka
Manual: Ekoenergetyka

On this page you will find the steps to connect the Ekoenergetyka charger to the E-Flux platform.

S
Written by Sjoerd Kortekaas
Updated this week

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Installation guide Ekoenergetyka

  • Configuration device (computer)

Follow the steps

Step 1: Connect the charger to the Charger Management Console

To access CMC (Charger Management Console), the user must connect to the charging station IP address from a web browser using a standard HTTP connection.

Step 2: Fill in the correct network settings

The network settings must be set according to the manufacturer's manual:

  • IP address: 192.168.14.100

  • Subnet mask: 255.255.255.0

Step 3: Log in to the Ekoenergetyka application

To run the application, users can use one of the popular web browsers: Chrome, Firefox etc. As an address, a user must type the IP address of the charging station - http://192.168.14.190 . After a successful connection, the user has to log in using the username and password provided by the manufacturer.

Step 4: Connect the charger to the backoffice URL

Edit the OCPP server URL (ws://ocpp.e-flux.nl/1.6/e-flux) in the Settings menu and restart the charging station. Your charging station will be connected to the E-Flux platform.

If you are the installer of the charging station, go to Step 5. If you are the owner of the charging station, go to step 6.

Step 5: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 6: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 5 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?