All Collections
Manual: Flexicharge
Manual: Flexicharge

On this page you will find the steps to connect the Flexicharge charger to the E-Flux by Road platform.

Stèphanie Zonneveld avatar
Written by Stèphanie Zonneveld
Updated over a week ago

Configuration Requirements

Follow the steps:

Step 1: Insert the SIM card you received into the SIM slot of the controller (see picture below)

Step 2: Connect the laptop to the charger with a micro-USB data cable via the still free port on the front of the controller.

Step 3: Open a web browser and enter the following IP address in the URL bar:

Step 4: A login window will appear. Login with the username operator. The password is yellow_zone. We recommend changing this password!

Change the language setting at the top right of the browser by selecting the preferred language.

Step 5: Click on network and enter the following information under Access Point Name (APN):

  • E-Flux -

All other data will be filled in automatically and you can leave it as is.

Step 6: Click on save

Step 7: Click on backend and enter the following data:

  • Connection type = GSM

Step 8: Change the OCPP ChargeBoxIdentity to the EVSE-id provided by E-flux

This is the number under the QR code (f.e. NL*EFL*EV*7378707), you need to copy this number in full.

Step 9: Change the Websock-SET JSON OCPP URL of the backend to:

  • E-Flux - ws://

Leave the rest of the settings as they are.

Step 10: Click save and reboot.

If you are the installer of the charging station, go to step 11. If you are the owner of the charging station, go to step 12.

Step 11: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 12: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 11 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?