All Collections
Manuals
Manual: EV Charging+
Manual: EV Charging+

On this page you will find the steps to connect the EV Charging+ charger to the E-Flux by Road back office platform.

Stèphanie Zonneveld avatar
Written by Stèphanie Zonneveld
Updated over a week ago

Configuration Requirements

  • Configuration package E-Flux by Road.

    • Contains: Sim card (optional), EVSE ID and configuration manual for the installer and owner.

  • Atlas AC Commercial configuration app.

  • Configuration device: mobile phone.

Follow the steps:

Step 1: App installation

  • Android:
    Download the Atlas commercial charger network configuration app by scanning the QR-code on the right or clicking on the link.

  • iPhone:
    First, you will need to get the UDID of your device, send it to EV Charging + (EVCCE) and they, in return, will send you the link to install the app.

Step 2: Log in
Open the app and log in using these credentials:

  • Account: maintenance

  • Password: 123654

Step 3: Select your charger

Turn Bluetooth on and click on START SCANNING to search for chargers. Select your charger and click on the CONNECT icon. Here you will need to enter an authorization code: “123456”.
​

Step 4. Network configuration
There are three optional network settings:

  • Ethernet.

  • Mobile (if the charger has a 4G module).

  • Wireless network as network connections.

Note that if you choose WiFi, you must turn to WLAN settings to enter the name and password of it. Remember to check the IP address when you connect via Ethernet. You should set the IP address manually if it doesn’t match.

Step 5: Enter the OCPP settings

Go to SETTINGS, then click on the Network icon. After that click on Server and choose Custom. Enter the following information:

  • Server address: ws://ocpp.e-flux.nl/1.6/e-flux

  • Server port: ws://ocpp.e-flux.nl/1.6/e-flux:port/

Reboot the charger to finalize all the changes.

If you are the installer of the charging station, go to step 6. If you are the owner of the charging station, go to step 7.

Step 6: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 7: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 7 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?