Skip to main content
All CollectionsManuals
Manual: Zappi (myenergi)
Manual: Zappi (myenergi)

On this page you will find the steps to connect the Zappi charger to the E-Flux by Road backoffice platform.

Gina ter Heide avatar
Written by Gina ter Heide
Updated over 2 months ago

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: Sim card (optional), EVSE ID and configuration manual for installer and owner

  • Online installation & user guide manufacturer

  • Configuration device: laptop

Follow the steps

Stap 1: Download the myenergi app on your smartphone

Step 2: Create a account in the myenergi app.

Stap 3: Ga naar het tabblad Location en selecteer myenergi Products.

Note: If you do not see the location button, in the left hand side bar, it's likely this is because you have not completed your locations information. Please do this first on the myaccount home screen.

Stap 4: Choose your charger and go to OCPP Settings

Stap 5: Fill in the following details

  • Select an EV Management Platform: Other/Manually Enter

  • De backend URL: ws://ocpp.e-flux.nl/1.6/e-flux/

  • ChargeBox ID: Serialnumber of your charger

  • Authorisation Key: leave empty

  • Press Save

Stap 6: Once the connection is established the status will tell you if the charger is online. Once the charger is online you can proceed to the next step.

If you are the installer of the charging station, go to Step 7. If you are the owner of the charging station, go to step 8.

Step 7: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 8: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 7 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!


​

Did this answer your question?