All Collections
Manuals
Manual: Enelion
Manual: Enelion

On this page you will find the steps to connect the Enelion charger to the E-Flux by Road platform.

Stef van der Meer avatar
Written by Stef van der Meer
Updated over a week ago

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Laptop or mobile phone.

Follow the steps:

Step 1: In order to connect to the WiFi hotspot of Lumina, use a computer or telephone to
scan the available WiFi networks. The broadcast network is named “Enelion-XXXX-
XXXX” where XXXX-XXXX stands for the serial number of the Enelion Lumina
charger. The password to the network is on the box and on the head of the charger.
Selecting this network and filling in the password will connect to the device.

Step 2: After connecting to the device’s network, it is possible to access the configuration
panel via a web browser. Enter the address http://192.168.8.8 in the address bar and
log in.

Step 3: To change the OCPP setting you have to log in as an administrator. Username is
admin and the default password is admin.

Step 4: Make sure that the Enelion Lumina has an Internet connection. Check that in the Network - Overview section.

Step 5: In the OCPP section in the Connection subpage you will find the option that will connect the charger to the E-Flux by Road OCPP server.

Fill in the following details:

  • Numer of connectors: The amount of sockets the charging stations has

  • Freecharge idTag: *leave empty*

  • OCPP URL: ws://ocpp.e-flux.nl/1.6/e-flux

  • Chargepoint ID: Serialnumer of the charger

Step 6: Reboot the charger and check the Connection state under status. If the Connection state is Connected you can proceed to step 7

If you are the installer of the charging station, go to Step 7. If you are the owner of the charging station, go to step 8.

Step 7: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical ticket.

Step 8: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 7 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?