Configuration Requirements
Configuration package E-Flux by Road
Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
For a wired connection:
A computer with the network card configured to 192.168.2.10
A RJ45 cable
For a remote connection:
A computer with access to the IP of the terminal (This function is only available with a software version of the terminal of at least 1.3.3.0.)
Installation guide DBT
Note: Websocket connections are accessible via two methods on DBT chargers:
Via a wired connection to the terminal via the local network switch
Via a remote connection via the network used for OCPP communication (provided that the SIM allows routing to the IP of the terminal from the computer that wishes to access the web pages)
Follow the steps
Step 1: Setting up the connection
Local wired connection: Connect one side of the RJ45 cable to an available port on the switch located inside the front door of the charger, and connect the other side of the cable to the computer.
Remote Connection: Insert a sim card in the modem of the charger that allows routing to the IP of the terminal from the computer which wishes to access the web pages.
Step 2: Access to the Web Pages
Open the internet browser and connect to the following address:
Wired connection: 192.168.2.127:2500
Remote connection: <@IPchargeur>:2500/index.html
You should arrive on the page as shown below.
In case of connection problems:
Wired connection: please check if the network cable is correctly connected, if the configuration of your network card is correct and try logging in again. To check the connection, it is possible to test a ping on the IP 192.168.2.127 (PLC) or 192.168.2.150 (OCPP modem).
Remote connection: please check if the IP of the terminal is accessible from the computer wishing to access the web pages
Step 3: Login to the Web Pages of the charger
To access the charger configuration pages, please use the following username and password:
Role: user
Password: qcng_dbt
Once logged in, you will access the following page:
Step 4: Enter the menu Param Cust User
In this menu it is possible to modify the name of the charger displayed on the home screen, the type of identification used to initiate a charge, the maximum output current of the DC charging points, the version and the address of the server OCPP, the charger's chargebox ID, how the modem connects to the internet and the Sim card settings:
Please enter the following values in the displayed parameters:
STATION_NAME: Fill in the unique serial number of the charger
IDENTIFICATION_TYPE: badge
DC1_OUTCURRMAX: Defined by DBT during the production process (Standard: 125)
DC2_OUTCURRMAX: Defined by DBT during the production process (Standard: 125)
OCPP_VERSION: 1.6J
OCPP_URL: ws://ocpp.e-flux.nl/1.6/e-flux
CHARGEBOXID_CUST: Fill in the unique serial number of the charger
INTERFACE: CELLULAR or WAN
CELLULAR_APN: auto;m2m.services
Step 5: Reboot the charger
Once the modifications have been made, click on the Save button and then on the Reboot button to apply the changes (the charger will then restart).
Note: Fill in the rest of the parameters from the menu’s TPE param User and DynX param User according to the installation manual, or use the standard values from DBT.
If you are the installer of the charging station, go to Step 6. If you are the owner of the charging station, go to step 7.
Step 6: Complete the following steps to activate the station on the E-Flux by Road platform:
Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 7: Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 6 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!