Configuration Requirements
Configuration package E-Flux by Road
Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Laptop
UTP cable
Step 1: Login to the Evonity Platform, URL: Go to http://ev3000:81
Username: operator
Password: operator
Step 2: Configure EVSE, Navigate to the Charging stations overview > EVSE configuration:
Step 3: Find the EVSE you want to configure and click the '+' icon next to it.
Click on the configuration icon.
Step 4: Make the following configuration settings: Set the enable mode to 'by OCPP'.
Step 5: Choose the lock mode of the socket: 'At EV connected - disconnected' for automatic locking when connected to a vehicle.
'by remote control' for remote locking via OCPP.
Click 'Save changes' to save your configuration.
Step 6: Go to the OCPP Configuration Overview.
Enter the backend URL and add '/OCPP ID' at the end, replacing 'OCPP ID'with your specific OCPP ID.
Like this: ws://ocpp.e-flux.nl/1.6/e-flux/''OCPPID''
After entering the correct URL, click 'Save changes'.
Step 7: Then click 'Restart OCPP' to restart the OCPP connection with the new configuration.
Step 8: Complete the following steps to activate the station on the E-Flux by Road platform:
Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 9: Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 11 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!