Skip to main content
All CollectionsManuals
Manual: ETAPpro
Manual: ETAPpro

On this page you will find the steps to connect the ETAPpro charger to the E-Flux by Road platform.

Jochem Boot avatar
Written by Jochem Boot
Updated over a week ago

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Installation guide ETAPpro

  • EV Chargeking configuration app

  • Configuration device: laptop/mobile phone

Follow the steps

Step 1: Use the Installation manual of the ETAPpro to safely complete the installation of the charger.

Step 2: Enter http://my.etap.pro in your webbrowser and login with your own credentials.

Step 3: Click on Add charger in the top right of the web page and add your charger by entering the serial number of the charger. The Security code of the charger can be found on the passport label with the QR code that came with the charger.

Step 4: Click on Edit Charger and change the name /of your charger if you like.

Step 5: Turn the OCPP setting on and click on the custom checkbox next to CPO Endpoint.

Step 6: Fill in the following server URL to connect the ETAPpro charger to the E-Flux by Road platform: ws://ocpp.e-flux.nl/1.6/e-flux/

Step 7: Reboot the charger by cutting of the power and turning on the power again.

If you are the installer of the charging station, go to Step 8. If you are the owner of the charging station, go to step 9.

Step 8: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 9: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 8 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!


​

Did this answer your question?