Skip to main content
All CollectionsManuals
Manual: Anyos
Manual: Anyos
Gina ter Heide avatar
Written by Gina ter Heide
Updated over 3 months ago

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • Laptop

  • UTP cable

Follow the steps:

By default our chargers are connected to ANYOS Hypervision server.

Step 1: Before doing any manipulation, please ensure that the Charging Station is powered on and well connected to the internet (through LAN or 4G).

Step 2: Then you can access our web interface portal ANYOS using the login and password you should have received from ANYOS support team.

Step 3: Once logged into the portal, you have access to the list of charging stations that are part of your admin group. You will see their current state, your charging station is identified by it's serial number (first column). You can click on the name of the charging station or on the pencil (at the right end of the window) to access to the configuration menu of the charging station.

The configuration menu gives you access to the charging station's identification data (name , OCPP ID and OCPP URL).

Step 4: The Configuration menu allows the user to select the authentication mode. You can choose RFID ON - OCPP..

Step 5: Then the charger will be connected to a CPO using the OCPP URL: ws://ocpp.road.io/e-flux

and u can use the serial number of you charger as OCPP ID.

If you are the installer of the charging station, go to Step 6. If you are the owner of the charging station, go to step 7.

Step 6: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 7: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 9 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?