Manual: E-Totem | E-Flux by Road Help Center

Configuration Requirements

Configuration package E-Flux by Road
- Contains: Sim card (optional), EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
Online installation & user guide E-Totem
Computer with ethernet port
Ethernet cable
A web browser (Chrome, Firefox, Edge…)

Step 1: Plug the ethernet cable in your computer and on the left ethernet port of the charger.

Note: The PC might be placed in a different area, depending on the charger type. Refer to the documentation of the charger to locate it.

Step 2: Configure your computer’s network adapter settings to the following values:

Step 3: Open your web browser and type in: 192.168.20.134/webadm/

Step 4: The web browser should then show the WebAdmin login page. The WebAdmin is a webpage UI situated inside the E-totem chargers.

Note: If the WebAdmin does not open in your current browser, please try a different web browser.

Step 5: Enter your username, password, and click login. By default, the login is admin and the password system.

Step 6: Go to Settings and click on the Supervision tab.

Step 7: Fill in the following values in the Supervision tab:

Charge Box Identity: enter the unique serial number of the charger or use the EVSE ID provided by E-Flux by Road.
URL du superviseur ws JSON: ws://ocpp.e-flux.nl/1.6/e-flux

Note: Do not change any other fields, as it might compromise other services on the charger.

Step 8: Click on the Network tab, and enter the following values:

Note: Do not change any other fields, as it might compromise other services on the charger.

If you are the installer of the charging station, go to Step 9. If you are the owner of the charging station, go to step 10.

Step 9: Complete the following steps to activate the station on the E-Flux by Road platform:

Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 10: Complete the following steps to register the station on the E-Flux by Road platform:

Ask your installer to complete Step 9 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
- Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!