Skip to main content
All CollectionsManuals
Manual: LEKTRI.CO
Manual: LEKTRI.CO

On this page you will find the steps to connect the LEKTRI.CO charger to the E-Flux by Road platform.

Jochem Boot avatar
Written by Jochem Boot
Updated over 3 months ago

Configuration Requirements

  • Configuration package E-Flux by Road

    • Contains: EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station

  • User and Installation manual LEKTRI.CO

  • Mobile app LEKTRI.CO

  • Configuration device: mobile phone

Follow the steps

Step 1: Use the LEKTRI.CO User Manual to safely complete the installation of the charger.

Step 2: Download the LEKTRI.CO app. You can find the app in Google Play or App store, or by scanning the QR code below.

Note: The app will first help you to connect the device to your WiFi network. Later on, with the LEKTRI.CO App you will be able to access and control your charger locally or remotely.

Step 3: Once you have connected your charger to the app, click on the settings button in the top right of the screen.

Step 4: In the settings menu, navigate to the Communication settings.


​

Step 5: Click on OCPP Server.

Step 6: Enable the OCPP connection and enter the following server URL below: ws://ocpp.e-flux.nl/1.6/e-flux
​

If you are the installer of the charging station, go to Step 7. If you are the owner of the charging station, go to step 8.

Step 7: Complete the following steps to activate the station on the E-Flux by Road platform:

  1. Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.

  2. Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.

  3. Click on “Setup charging station”.

  4. Click on Upload Configuration, then click Next.

  5. Choose and define the connector type, and choose “Save Connector Configuration”.

  6. The charging station is now activated and ready to be registered by the owner!

*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.

Step 8: Complete the following steps to register the station on the E-Flux by Road platform:

  1. Ask your installer to complete Step 7 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.

  2. Create an E-Flux by Road account by going to www.e-flux.io/signup.

    • Is this charging station facilitated by your employer? Check your email for the invitation.

  3. Follow the steps to add the location and register your charging station.

  4. Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.

  5. The charging station is now registered and ready to be used!

The charging station is now connected to the E-Flux by Road platform!

Did this answer your question?