Configuration Requirements
Configuration package E-Flux by Road
Contains: Sim card, EVSE ID, configuration manual for the installer and registration manual for the owner of the charging station
ABL Configuration app
Mobile phone
Follow the steps
Step 1: Insert the E-Flux sim card in the 4G-dongle that was delivered with the charging station.
Step 2: Download the ABL configuration app from the App Store or Google Play store.
Step 3: Open the app, click on Start a new configuration and confirm that you are a certified electrician.
Step 4: Follow the steps in the configuration app and make a connection with the eM4 by scanning the QR code that’s shown on the commissioning label of the charger.
Step 5: After adding the eM4 to the configuration app, press Next to create a password for the charger.
Note: The charger will reboot automatically after you’ve created a password. Once the charger has restarted you will get the option to connect the charger to the local WiFi network for easier access to the app in the future.
Step 6: Choose one of the provided network connection methods (LAN/LTE), add more chargers to the same network if necessary and configure the technical settings of the charger(s).
Step 7: Click on Use template and select Road in the available backend presets.
Step 8: Check the backend settings and click on Next to confirm the settings.
If you are the installer of the charging station, go to Step 9. If you are the owner of the charging station, go to step 10.
Step 9: Complete the following steps to activate the station on the E-Flux by Road platform:
Login to your Field Service Account or create a Field Service Account via www.e-flux.io/installer-signup*.
Go to “Setup New EVSE” in the menu on the left and enter the serial number or OCPP ID of the station.
Click on “Setup charging station”.
Click on Upload Configuration, then click Next.
Choose and define the connector type, and choose “Save Connector Configuration”.
The charging station is now activated and ready to be registered by the owner!
*A Field Service Account is for installers only and will be used as a point of contact for technical tickets.
Step 10: Complete the following steps to register the station on the E-Flux by Road platform:
Ask your installer to complete Step 9 to finish the configuration of your charger, or call E-Flux by Road to finish the configuration.
Create an E-Flux by Road account by going to www.e-flux.io/signup.
Is this charging station facilitated by your employer? Check your email for the invitation.
Follow the steps to add the location and register your charging station.
Put the sticker with the QR code on the charging station so it’s easier to identify the station if you need support.
The charging station is now registered and ready to be used!
The charging station is now connected to the E-Flux by Road platform!